1/4 inch aluminum diamond plate, often referred to as checker plate or tread plate, is a type of aluminum sheet with a nominal base thickness of 0.250 inches. It features a raised, repeating diamond or
1/4 inch aluminum checker plate, also known as diamond plate or tread plate, refers to a sheet of aluminum with a nominal thickness of 0.25 inches (approximately 6.35 mm). It features a raised, repeating pattern
The 1/4 inch (often written as "1 4") 6061 aluminum plate is a highly versatile and widely used structural alloy. This specific thickness offers a good balance between strength, weight, and formability, making it suitable
A 1 3/8 inch (approximately 34.925mm) outside diameter (OD) aluminum tube is a common and versatile profile used in a wide array of structural, mechanical, and architectural applications. Its specific properties are largely determined by
A 1 3/8 inch aluminum tube refers to a cylindrical hollow profile with an outer diameter (OD) of 1.375 inches (approximately 34.925 mm). This specific dimension is utilized across a diverse range of applications due
A 1/2 inch (approximately 12.7mm) thick aluminum plate is a widely utilized material across numerous industries due to its favorable combination of properties. This thickness offers substantial rigidity and strength while retaining the inherent benefits
Aluminum heat transfer plates designed for 1/2 inch PEX tubing are essential components in radiant floor heating systems. Their primary function is to enhance the transfer of heat from the PEX tubing to the surrounding
A 1/2 inch (12.7mm) aluminum plate offers a significant balance of strength, rigidity, and relatively low weight, making it a versatile material for a wide range of industrial and structural applications. This thickness provides substantial
A "1/2 inch aluminum coil" typically refers to an aluminum strip that has a nominal width of 0.5 inches (approximately 12.7 mm) and is supplied in a coiled form. The thickness of this aluminum strip
