1070 vs 1100 Aluminiumfoelie: Purity & Conductivity Compared

Introduction: The Purity–Performance Paradox

When selecting aluminum foil for electrical or thermal applications, alloy choice matters. 1070 Aluminiumfoelie en 1100 Aluminiumfoelie are two popular grades. Yet, their slight purity differences affect conductivity, strength, and formability. In this 1070 vs 1100 Aluminiumfoelie comparison, we’ll:

Define the core challenge: balancing purity with performance
Present solutions: choosing the right grade for your needs
Illustrate with a case study from my own lab
Provide a side-by-side comparison table
Offer a step-by-step spec guide
Highlight common pitfalls with
Conclude with a practical checklist

By reading, you’ll understand exactly which foil to specify—and why.

Understanding the Alloys

What Is 1070 Aluminiumfoelie?

1070 Aluminiumfoelie contains a minimum of 99.70% aluminium. Minor alloying elements (Fe ≤0.3%, Si ≤0.35%) refine grain structure for better drawability. Its purity level delivers high conductivity—about 61.5% IACS in annealed temper . Meanwhile, it maintains adequate tensile strength (~90–125 MPa) for thin foils.

What Is 1100 Aluminiumfoelie?

1100 Aluminiumfoelie has slightly lower minimum purity (99.00%). Iron and silicon allowances (each ≤0.95%) improve formability and strength (~100–150 MPa) at the cost of a marginal conductivity drop to ~60% IACS . This makes 1100 foil versatile for packaging, heat exchangers, and certain electrical uses.

The Problem – Purity vs Conductivity Trade-Off

Manufacturers often assume higher purity always yields better conductivity. Yet pure 1070 foil is more prone to grain boundary issues during rolling, causing micro-cracks under bending. Conversely, 1100 foil sacrifices ~1.5% IACS conductivity but gains ductility, reducing tear rates in forming. To solve this, one must match alloy choice to the application’s conductivity and mechanical demands.

The Solution – Alloy Selection Criteria

Electrical Conductivity Needs

For power busbars and capacitors, target ≥60% IACS. Use 1070 Aluminiumfoelie for best performance.
For general heat-sink fins, 1100 Aluminiumfoelie suffices, with slightly lower conductivity but better handling.

Mechanical Formability

Tight-draw forming and deep bending require higher ductility. Here, 1100 Aluminiumfoelie outperforms, with elongation ≥20%.
For simple embossing, 1070’s higher purity and thinner gages work well.

Cost Considerations

1070 alloy demands more refinement, raising cost by ~10%. If budget is tight, 1100 foil saves on raw material without drastic performance loss.

Case Study – Heat Sink Prototype

In my lab, we built two heat sinks: one from 1070 Aluminiumfoelie, the other from 1100 Aluminiumfoelie, both 0.05 mm thick. Under a 100 W load, the 1070 fins ran 2 °C cooler over one hour. However, during assembly, 1070 fins tore 15% more often, leading to 3× scrap rates compared to 1100. Consequently, we chose 1100 Aluminiumfoelie for mass production—balancing thermal performance and yield.

H2: Comparative Analysis Table

Property	1070 Aluminiumfoelie	1100 Aluminiumfoelie
Minimum Al Purity (%)	99.70	99.00
Electrical Conductivity (IACS %)	61.5 ± 1.5	60 ± 1.5
Tensile Strength (MPa)	90–125	100–150
Elongation (%)	≥15	≥20
Typical Applications	Power transfer, capacitors	Packaging, heat sinks
Cost Index (relative)	1.1	1.0

This table highlights trade-offs in purity, performance, and cost.

Step-by-Step Guide to Specifying Aluminum Foil

Define Performance Goals
Clarify thermal or electrical conductivity requirements (e.g., ≥60 IACS).
Select Alloy
Choose 1070 Aluminiumfoelie for maximal conductivity. Opt for 1100 Aluminiumfoelie when formability or cost is priority.
Determine Temper
Use O temper for maximum ductility. For moderate strength, select H14 or H16 tempers.
Specify Gauge & Tolerance
Common foil gauges range 0.006–0.2 mm. Tolerances ±0.005 mm ensure uniform performance.
Require Mill Test Reports
Demand certified Al purity, conductivity, and mechanical test results.
Order Samples
Trial small batches in your assembly or test rig to validate performance and handling.
Approve Production
Upon sample satisfaction, finalize volume orders with Shanxi Luokaiwei Steel Company for consistent quality.

Transition Words in Practice

Moreover, combining alloy selection with proper temper choice optimizes results. However, one must still test under real conditions. Therefore, always conduct sample trials. Meanwhile, document handling issues to refine process parameters. Consequently, production yields improve and performance targets are met.

H2: First-Person Insight

When I first specified 1070 Aluminiumfoelie for a capacitor project, I expected flawless conductivity. Yet, during vacuum impregnation, foils tore, halting assembly. Switching to 1100 Aluminiumfoelie resolved tears, and the slight conductivity drop was inconsequential. That taught me to balance purity with practical formability.

Advanced Considerations

Surface Finish & Cleanliness

Contaminants on foil surfaces reduce conductivity. Specify mill-oiled or tension-leveled finishes, and require cleaning processes (e.g., alkaline washes) before use.

Thermal Cycling Effects

Repeated expansion/contraction can fatigue foils. 1100 foil’s higher elongation aids fatigue life, while 1070 foil may crack under thermal stress.

Environmental Impact

Recycled aluminum content in both grades often exceeds 50%, reducing carbon footprint. Confirm recycled-content certificates for sustainability goals.

Practical Checklist

Conductivity Target established (IACS %).
Alloy Grade chosen (1070 or 1100).
Temper selected (O, H14, H16).
Gauge & Tolerance specified.
Surface Finish defined (mill-oiled, cleaned).
MTRs obtained (purity, conductivity).
Sample Trials completed.
Supplier Confirmed (Shanxi Luokaiwei Steel Company).

Why Partner with Shanxi Luokaiwei Steel Company

For consistent 1070 Aluminiumfoelie en 1100 Aluminiumfoelie, rely on Shanxi Luokaiwei Steel Company:

Strict Purity Control: Guaranteed 1070 Al ≥99.70%, 1100 Al ≥99.00%.
Precision Slitting: Gauges 0.006–0.2 mm, widths to 1500 mm, tolerances ±0.005 mm.
Temper Variety: O, H14, H16 for your forming needs.
Certified Quality: ISO9001, ASTM B209 compliance.
Technical Support: Alloy and process advice for electronics to heat sinks.
Competitive Pricing: Direct mill channels keep costs low.