June 2025

A "1 16 aluminum tube" typically refers to an aluminum tube with a 1-inch outer diameter (OD) and a 1/16-inch (approximately 0.0625 inches or 1.5875 mm) wall thickness. These dimensions offer a balance of low weight, moderate strength, and versatility for various applications. Key Characteristics and Advantages Aluminum tubing of this specification offers several distinct […]

A 1/16 inch aluminum plate refers to a flat sheet of aluminum with a nominal thickness of 0.0625 inches (approximately 1.5875 millimeters). This thickness is widely utilized across various industries due to its balance of strength, light weight, and formability. Common Aluminum Alloys for 1/16 Inch Plate Several aluminum alloys are commonly available in 1/16

Understanding 1/16 Inch Aluminum Diamond Plate 1/16 inch aluminum diamond plate, often referred to as tread plate or checker plate, is a type of aluminum sheet featuring a raised diamond or linear pattern on one side. The "1/16 inch" specifies the nominal thickness of the base metal before the pattern is embossed. This pattern provides

An aluminum tube with nominal dimensions of 1.5 inches by 3 inches refers to an extruded profile, typically a rectangular hollow section. These dimensions usually denote the outer width and height of the tube, while the wall thickness can vary depending on the specific product and application requirements. Key Characteristics and Material Properties Aluminum, as

The specification '1 1 2 x 3 1 2 aluminum tube' can be interpreted in several ways due to its non-standard notation. In industrial contexts for tubing, if this refers to dimensions, it most likely points to an aluminum tube with cross-sectional measurements approximating 1 1/2 inches by 3 1/2 inches. This typically describes a

0.045 aluminum diamond plate refers to a specific thickness (0.045 inches) of aluminum sheet featuring a raised diamond or lozenge pattern on one side. This pattern provides excellent slip resistance and adds structural rigidity to the relatively thin sheet. Key Characteristics and Alloys Aluminum diamond plate, at this .045" thickness, is valued for its lightweight

Understanding 040 Aluminum Gutter Coil 040 aluminum gutter coil refers to aluminum sheet metal with a thickness of 0.040 inches, supplied in continuous rolls for the fabrication of seamless rain gutters. This specific thickness denotes a robust and durable material choice for rainwater management systems. Advantages of 0.040 Thickness The primary benefit of 0.040-inch aluminum

Understanding 0.040 Inch Aluminum Coils 0.040 inch aluminum coils, often referred to as "040 aluminum," denote aluminum sheet metal that has a nominal thickness of 0.040 inches (approximately 1.016 mm). This specific thickness provides a good balance between formability, durability, and weight, making it a highly versatile material across various industries. Supplied in a continuous

Sourcing 0.040 inch (approximately 1.016mm) aluminum coil requires careful consideration of supplier capabilities, material specifications, and logistical efficiency. This thickness is commonly used in applications such as signage, roofing, gutters, automotive components, and general fabrication due to its balance of formability and rigidity. Key Criteria for Selecting 040 Aluminum Coil Suppliers When evaluating potential suppliers

0.032 inch aluminum coil stock is a versatile material widely used across various industries, including construction (roofing, gutters, siding), transportation, and manufacturing due to its favorable strength-to-weight ratio, corrosion resistance, and formability. Selecting the right factory for sourcing this specific gauge is crucial for ensuring product quality and project success. Key Factors in Selecting a