June 2025

A 1/2 inch (approximately 12.7mm) thick aluminum plate is a widely utilized material across numerous industries due to its favorable combination of properties. This thickness offers substantial rigidity and strength while retaining the inherent benefits of aluminum. Key Characteristics and Advantages Aluminum plates of this dimension typically exhibit the following beneficial traits: Excellent Strength-to-Weight Ratio: […]

Aluminum heat transfer plates designed for 1/2 inch PEX tubing are essential components in radiant floor heating systems. Their primary function is to enhance the transfer of heat from the PEX tubing to the surrounding flooring material, improving the overall efficiency and responsiveness of the heating system. These plates are typically manufactured from conductive aluminum

A 1/2 inch (12.7mm) aluminum plate offers a significant balance of strength, rigidity, and relatively low weight, making it a versatile material for a wide range of industrial and structural applications. This thickness provides substantial load-bearing capabilities while remaining manageable for fabrication processes. Key Properties of 1/2 Inch Aluminum Plate Strength-to-Weight Ratio: Aluminum is significantly

A "1/2 inch aluminum coil" typically refers to an aluminum strip that has a nominal width of 0.5 inches (approximately 12.7 mm) and is supplied in a coiled form. The thickness of this aluminum strip can vary significantly based on the specific application requirements. These coils are generally produced by slitting wider aluminum master coils

1/2 inch aluminum tubing coils are a versatile product widely used across various industries due to aluminum's inherent beneficial properties. This specific sizing refers to the outer diameter (OD) of the tube, typically 0.5 inches or 12.7mm, supplied in a continuous coiled form for ease of transport, storage, and deployment in long-run applications. Key Characteristics

Calculating the Weight of 1/2 Inch Aluminum Plate To determine the weight of a 1/2 inch (0.5 inches) aluminum plate per square foot, we utilize the material's density and the volume of the plate for that specific area. The typical density of aluminum is approximately 0.0975 pounds per cubic inch (lbs/in³). This value can vary

Calculating the weight of a 1/2 inch aluminum plate is essential for various engineering, construction, and logistical applications. The weight is primarily determined by the plate's dimensions (length and width) and the specific aluminum alloy's density. Understanding the Basics To determine the weight, we use the fundamental formula: Weight = Volume × Density For a

Understanding 1/2 Inch Aluminum Plate A 1/2 inch aluminum plate refers to a flat piece of aluminum material with a nominal thickness of 0.5 inches (approximately 12.7 millimeters). These plates are valued for their excellent strength-to-weight ratio, corrosion resistance, and workability, making them suitable for a wide range of applications. Common Alloys and Their Characteristics

Understanding 1/2 Inch Aluminum Diamond Plate The term "1/2 aluminum diamond plate" refers to a specific type of aluminum sheet material. The "1/2" denotes the nominal thickness of the plate, which is 0.5 inches (approximately 12.7mm). This is a substantial thickness, indicating its suitability for heavy-duty applications. Aluminum diamond plate, also known as tread plate

Understanding 1/2 Inch 6061 Aluminum Plate The designation "1 2 6061 aluminum plate" refers to a plate made from 6061 aluminum alloy with a thickness of 1/2 inch (approximately 12.7mm). 6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. It is one of the most versatile and widely used