June 2025

1050 aluminum coil is a commercially pure wrought aluminum alloy with a minimum of 99.5% aluminum. It is renowned for its excellent corrosion resistance, high ductility, and very good weldability and formability. Due to these properties, 1050 aluminum coil is widely utilized in applications requiring high formability and corrosion resistance rather than high strength. Common […]

1050 aluminum alloy is a prominent member of the commercially pure wrought aluminum family, distinguished by its minimum 99.5% aluminum content. This high purity endows it with excellent ductility, high corrosion resistance, superb reflectivity, and commendable electrical and thermal conductivity. It is a non-heat-treatable alloy that gains strength through cold working. Common Applications of 1050

1050 aluminum coil is a prominent member of the 1xxx series of commercially pure aluminum. It contains a minimum of 99.5% aluminum, offering excellent ductility, high corrosion resistance, and superior electrical and thermal conductivity. These properties make it a sought-after material for various industrial and commercial applications where high formability and conductivity are prioritized over

1050 Aluminum Coil is a popular choice due to its excellent corrosion resistance, high ductility, and superior reflective finish. It is widely used in various applications. Key Properties of 1050 Aluminum Coil Alloy Composition: Primarily aluminum (99.5% minimum) with small additions of iron and silicon. Corrosion Resistance: Excellent, especially in atmospheric conditions. Weldability: Readily weldable

Understanding 1050 Aluminum Alloy 1050 aluminum is a popular grade within the 1000 series of commercially pure aluminum. It contains a minimum of 99.5% aluminum, with trace amounts of other elements. This high purity contributes significantly to its characteristic properties. It is a non-heat-treatable alloy, meaning its strength is primarily achieved through work hardening rather

102'' Wide Aluminum Roof Coil offers a versatile solution for roofing needs, balancing cost-effectiveness with durability. Key Considerations for 102'' Wide Aluminum Roof Coil Material Properties: Aluminum, being lighter than steel, simplifies installation. It also exhibits excellent corrosion resistance, crucial for longevity. However, aluminum is softer, so thicker gauges are recommended to enhance dent resistance

A 10-inch aluminum trim coil is a versatile construction material, primarily used for exterior finishing and protection on residential and commercial buildings. This product consists of a continuous roll of aluminum sheet, typically 10 inches wide, designed to be cut and formed on-site to create custom trim pieces. Key Characteristics and Benefits Aluminum trim coil

1/8 inch aluminum tubing in coil form refers to a continuous length of aluminum tube with an outer diameter (OD) of 0.125 inches (3.175 mm), wound into a coil. This format is highly valued for applications requiring long, unbroken lines and ease of transport and handling. Key Characteristics: Material: Typically made from aluminum alloys like

A 1/4 inch aluminum tubing coil refers to aluminum tubing with an outer diameter (OD) of 0.25 inches, supplied in a coiled form for ease of transport, storage, and installation. This configuration is highly popular across various industries due to its versatility and the inherent properties of aluminum. Key Characteristics and Alloys Aluminum tubing, particularly

Half-inch aluminum tubing coils are widely utilized across various industries due to their unique combination of properties. This specific dimension refers to the outer diameter (OD) of the tubing, which is approximately 12.7mm. The coiled form allows for long, continuous lengths, minimizing the need for joints and facilitating easier installation in many applications. Key Advantages